4
Find the grounding arm and push it down.
A
B
A. The grounding arm is up
B. The grounding arm is down
(level C4)
5
After the change, write "The EMC level was
changed" and the date on the "product modified"
label. If the label is not attached at this time, attach
it on the drive near the name plate.
Product modified
Date:
Date:
Date:
7.6.4
THE EMC JUMPER IN MR9
To make a change in the EMC protection of the AC drive, you must find the necessary EMC
jumpers. To change the EMC level from C2 or C3 (in 690 V) to C4, remove the EMC jumpers.
To change the EMC level from C4 to C2 or C3, install the EMC jumpers. You can find the EMC
jumpers, which are not installed, in the accessories bag.
HOW TO FIND THE EMC JUMPER 1
1
Open the cover of the AC drive.
2
Remove the cover of the fan.
3
In IP54, also remove the fan.
COMMISSIONING AND ADDITIONAL INSTRUCTIONS
VACON · 115
24-HOUR S358 (0)201 212 575 · EMAIL: [email protected]
7
Содержание 100 flow
Страница 1: ...vacon 100 vacon 100 flow vacon 100 hvac ac drives installation manual wall mounted drives ...
Страница 2: ......
Страница 4: ...VACON 4 TEL 358 0 201 2121 FAX 358 0 201 212 205 ...
Страница 78: ...3 Remove the cable cover M4x8 MR8 M4x8 MR9 VACON 78 POWER CABLING 5 TEL 358 0 201 2121 FAX 358 0 201 212 205 ...
