V-TEK Royce DE35-ST, Руководство пользователя

Страница: 66 / 146

DE35-ST Operating Instructions
D292469I 65
12. ARM GO TO PLACE POSITION.
The arm will now move to the right to the position over the waffle pack
to place the die. If inspections options are installed on the system, the
arm will move to whatever is the next position in the sequence.
13. GO DOWN TO PLACE HEIGHT.
The Pickup Arm will go down to the Place Height to place the die into the
waffle pack. At this time, use the
UP/DOWN
keys to properly adjust the
Place Height . The ARROW keys may also be used to move the arm
left/right and the table forward/backward to properly position the die
into the waffle pack.
14. TURN OFF PICKUP VACUUM.
The pickup vacuum is turned OFF to release the die in the waffle pack.
15. PURGE PICKUP X.XXX SECS.
A puff of air is applied to the Pickup Tip to insure the die releases. Use
the + / – keys to increase or decrease this time according to the
Coarse/Fine key. Fine will adjust the time by 0.010 increments and
Coarse will adjust by 0.100 increments.
16. GO TO TRAVERSE HEIGHT.
Pick up lifts to Traverse Height in order to clear all obstructions while
traveling to the wait position.
17. FINISH CYCLE.
Arm goes to the wait position just to the right of the field of view of the
optics. This position is adjustable using the Left/Right Arrow keys. This
position can be placed as close to the pick position as the Operator wants
to improve their through-put.