DE35-ST Operating Instructions
D292469I
125
7.
Inspect piston/plunger and internal o-ring for debris. Wipe off the piston and
replace o-ring [2091] if worn or cracked. Apply a small amount of grease [2359]
around the o-ring. Inspect eject body o-ring [2441] and replace if worn or
cracked.
a.
Plunger style
eject heads, re-install plunger into flange, install and tighten
the locking set screw until it is below the threads of the eject head body
8.
Reassembly:
a.
Hex type
eject heads:
i.
Insert the piston into the flange, then
the o-ring [2091] and spring on to the
piston.
Body o-ring
[2441]
Piston o-ring [2091]
(Internal)
Содержание Royce DE35-ST
