V-TEK Royce DE35-ST, Руководство пользователя

Страница: 119 / 146

118 D292469I
2. For both EJT and EJA styles, hold the top of the eject head body (away from the
needle holes) and bottom of brass piston. Press up on the piston until the locking
set screw is mid-position and remove the locking set screw using a 0.035” hex key
from the slot in the threads.
3. Ease the brass piston from the body of the eject head and remove the spring [PN
2399]. Remove the sticker [111019] from the bottom of the eject head.
4.
Each needle has a set screw that secures it in the brass piston.
Locate the needle(s) that needs replacement and loosen the set
screws. Thoroughly remove the needles.
5. Inspect piston and o-ring for debris. Wipe off the piston and replace o-ring [2350] if
worn or cracked. Apply a small amount of grease [2359] around the o-ring and
piston. Inspect eject body o-ring [2441] and replace if worn or cracked.
Piston
o-ring
[2350]
Loosen Needle
Set screw
Locking
Set
Screw
Dot
Sticker