Utax CLP 3635, Инструкция по эксплуатации

Страница: 82 / 222

4-24 Using the Operation Panel
Using Proof-and-Hold
When you print multiple copies, this mode first prints one copy so that you
can proof it before continuing to print the remaining copies. Since you can
proof the printouts before printing the remaining copies, wastage of paper
can be reduced.
The printer prints one copy and, at the same time, saves the print job on
the hard disk/RAM disk. You can also change the number of copies when
resuming printing from the operation panel.
When the printer is turned off, all stored jobs will be deleted.
Printing Remaining Copies of a Proof-and-Hold Job
1
In the Job Box menu, press U or V to select
Quick Copy
.
2
Press [OK] . The
Quick Copy
screen appears listing the user names
for stored jobs.
3
Press U or V to select the user name you entered in the printer
driver.
4
Press [OK] . The printer displays a list of the jobs stored under the
selected user name.
5
Press U or V to select the name of the job to be printed.
6
Press [OK] . The
Copies
menu screen appears.
If you want to change the number of remaining copies to be printed,
use the arrow keys to set the number of copies to be printed.
Press
U
or
V
to increase or decrease, respectively, the value at the
blinking cursor.
Use
Y and Z to move the cursor right and left.
7
Press [OK] . A confirmation message is displayed.
Note Refer to KX Printer Driver User Guide for the driver
settings.
Quick Copy:
a b
l
User01
l
User02
l
User03
l
User01:
a b
Q
Data01
Q
Data02
Q
Data03
[ Delete ]
Copies:
a b
(1 - 999)
/**1-
copies
M
Print.
Are you sure?
z Q
Data01
[ Yes ] [ No ]