Utax CLP 3521 Скачать руководство пользователя страница 86

Страница: 86 / 205

Troubleshooting

5-11

Memory Card and USB Memory Errors

RAM Disk Errors

Code

Meaning

The printer does not support the memory card inserted, or the memory card

is broken. Insert the correct memory card.

For more information, refer to

Memory Card (Using the memory card)

section

of the

Advanced Operation Guide

The memory card is not installed. Recheck the requirements for using the

system and the memory card.

The memory card is write protected. Check the memory card's status.

There is not enough space in the memory card. Delete unnecessary files or

use a new memory card.

The specified file is not on the memory card or the USB memory.

There is not enough printer memory to support the memory card system.

Increase printer memory.

The memory card is write protected, or invalid. Check the memory card's

status.

Code

Meaning

Format error. Try turning the power off and on again.

RAM disk mode is

Off

. Turn RAM disk mode

from the operation panel.

No disk space. Purge unnecessary files.

Specified file is not on disk.

Insufficient printer memory to support the RAM disk system. Expand printer

memory.

Содержание CLP 3521














































































































































































































Результаты поиска

Содержание CLP 3521

Отзывы:

Похожие инструкции для CLP 3521

Бренды по названию

Популярные бренды

Utax CLP 3521, Инструкция по эксплуатации

Результаты поиска

Содержание CLP 3521

Отзывы:

Похожие инструкции для CLP 3521

Бренды по названию

Популярные бренды