Utax CLP 3521, Инструкция по эксплуатации

Страница: 46 / 205

Printing Operation 3-3
TCP/IP
This section describes how to enable the TCP/IP protocol.
1
If
TCP/IP
is set to
Off
, use
U
or
V
to select
On
and press [OK] .
2
Press
Z
. Each time you press
U
or
V
, the selection changes.
3
Display the item you want to set and press [OK] . A blinking question
mark (
?
) appears while you are setting
DHCP
and
Bonjour
. A
blinking cursor (
_
) appears while you are setting
IP Address
,
Subnet Mask
and
Gateway
.
4
Press
U
or
V
to select
On
or
Off
as the setting for
DHCP
and
Bonjour
.
For the
IP Address
,
Subnet Mask
and
Gateway
settings, press
U
or
V
to move the blinking cursor to the number you want to change
(
000
to
255
). Use
Y
and
Z
to move the cursor right and left.
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Note
Check with your network administrator for the network
address settings.
>TCP/IP >
On
>>IP Address
000.000.000.000
>>Subnet Mask
000.000.000.000
>>Gateway
000.000.000.000
>>DHCP
Off
>>Bonjour
Off
>>Subnet Mask
000.000.000.000