Utax CLP 3521, Инструкция по эксплуатации

Страница: 111 / 205

6-20 Using the Operation Panel
(Data Name) ID (number of copies) (Input passwords)
(Data Name) Copies (number of copies) (Number of copies / deleted)
• Job Box Configuration (Job Box Configuration)
1
Press [MENU] .
2
Press
U
or
V
repeatedly until
Job Box >
appears.
Note that menus shown in the list may vary depending on which optional
units installed in the printer.
Quick Copy (Using Quick Copy)
This mode enables you to print the requested number of copies of a job,
simultaneously storing the job on the hard disk/RAM disk. When
additional copies are required, you can reprint the required number of
copies from the printer operation panel. To print a job as a quick copy job,
refer to
KX Printer Driver User Guide
.
The default number of print jobs that can be stored on the hard disk is 32.
This value can be increased to up to 50 from the Job Box Configuration
menu. For details, refer to
Changing the Maximum Number of Quick
Copy on page 6-24
. When the number of jobs reaches the limit, the oldest
job will be overwritten by the new one.
When the printer is turned off, all stored jobs will be deleted.
Note
Refer to the
KX Printer Driver User Guide
for the driver
settings.
Job Box >