Utax CLP 3521, Инструкция по эксплуатации

Страница: 168 / 205

Using the Operation Panel 6-77
Change Password (Administrator Password change)
You can use this to change the administrator password.
1
In step 3 in
Password (Administrator Password input)
above, press
U
or
V
while the
Admin (Change)
screen is displayed until
>Change
Password
appears.
IMPORTANT The administrator password is not displayed.
2
Press [OK] . A blinking cursor (
_
) appears.
3
Press
U
or
V
to increase or decrease, respectively, the value at the
blinking cursor. Enter the password to be changed. Use
Y
and
Z
to
move the cursor right and left. Enter a password consisting of
between 0 and 16 numbers.
4
Press [OK] . A confirmation screen appears. (E.g.: Where the
administrator password is changed to
010
)
5
Press [OK] . The new administrator password is confirmed.
6
Press [MENU] . The display returns to
Ready
.
>Change Password
****************
>Change Password
_
OK?
010