Utax CLP 3521, Инструкция по эксплуатации

Страница: 146 / 205

Using the Operation Panel 6-55
Timer (Timer setting)
This specifies timer-related settings such as the automatic form-feed
timeout and the timeout settings for Auto Sleep.
The options available in Timer are as follows:
• Form Feed Time Out (Automatic form feed timeout setting)
• Sleep Timer (Sleep timer timeout time)
• Auto Error Clear (Auto error clear setting)
• Error Clear Timer (Setting the error clear time)
• Auto Panel Reset (Auto panel reset settings)
• Panel Reset Timer (Setting the panel reset timer)
• Auto Sleep (Setting the sleep timer)
1
Press
Z
while
Device Common >
is displayed.
2
Press
U
or
V
repeatedly until
>Timer >
appears.
Form Feed Time Out (Automatic form feed timeout setting)
If the printer receives no data for a certain period, it will time out and
release the current interface. It prints whatever data it has in its buffer and
feeds out the page. The default form feed timeout time is
30
seconds.
1
Press
Z
while
>Timer >
is displayed.
2
Press
U
or
V
repeatedly until
>>Form Feed Time Out
appears.
3
Press
[OK]
. A blinking cursor (
_
) appears.
4
Press
U
or
V
to increase or decrease the value at the blinking cursor
and set the desired time. The timeout time can be between
5
and
495
seconds, in 5-second increments. Use
Y
and
Z
to move the cursor
right and left.
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
>Timer >
>>Form Feed
Time Out 030sec.