51
Secondary Installation
P
aneL
i
nstaLLation
:
Remove
Step 3. Remove the side liner retainers one
at a time using a 5/16 socket (see
Figure 75). The screws only have
to be loosened, not completely
removed, as the retainers are slotted.
*Note: The upper rear liner is
supported by the side liners. When
removing the side liners, be sure to
properly support the upper rear liner
so that it does not fall.
Step 4. Remove the upper and lower
rear liners.
Step 5.
Prepare new liners for
installation. Wear clean vinyl
gloves when handling the
liners, the ceramic material can
irritate your skin. Take care not
to damage the liners as they
are very fragile and can chip
easily. If handling porcelain
Figure 74:
Light Deflector Removal
Figure 75: Liner Retainers
liners, it is still a good idea to wear gloves as the oils from your fingers and stain the enameled
coating. If the liners arrive damaged, please contact your Urbana dealer for replacement.
Step 6. Install the new liners in the following order: Bottom Rear, Left Side, Top Rear, Front
and Right Side last. Please note that any liner options containing brick will have to be aligned
with each other. The top rear liner will only line up with the side liners in one position. Retighten
retainers once liners are in position.
Step 7. Reinstall removed components.
Step 1. Remove safety screen, door trim,
and glass door (see “
M
aIntenance
anD
s
erVIce
”
section).
Step 2.
Remove light deflector by removing
the four (4) retaining T-20 screws (see
Figure 74).
