22
Initial Installation
QUALIFIED INSTALLERS ONLY
Figure 33: Side Cover Removal
Adjustment Slots
F
Raming
D
ePth
:
The U44 can adjust its front face to account for different framing material thicknesses. It can account for
material thickness ranging from 1/2” to 2”.
1. Remove the safety screen (see
M
aIntenance
a
nD
s
erVIce
- r
eMoVe
s
afety
s
creen
on page 10).
2. Remove the door trim (see
M
aIntenance
a
nD
s
erVIce
- r
eMoVe
D
oor
t
rIM
on page 11).
3. On the inside of the cabinet there are two side covers attached via magnets. Gently pull on the side cover
until they detach and set them aside (see Figure 33).
4. There are eleven (11) slotted fasteners that need to be loosened to adjust the framing depth. There are
two (2) behind the side covers removed in the prior step, four (4) on the outside of each cabinet side,
and one (1) of the top-center of the unit (see Figure 34).
5. With the fasteners loosened, the front face should now be adjustable. All pieces are still connected
to each other and should move as one. Adjust the depth to match the desired framing material then
retighten the eleven (11) slotted fasteners.
Figure 34: Framing Depth Adjustment
