16
Maintenance And Service
c
omPonent
a
ccess
:
1. Remove the safety screen (see
M
aIntenance
a
nD
s
erVIce
- r
eMoVe
s
afety
s
creen
on page 10).
2. Remove the door trim (see
M
aIntenance
a
nD
s
erVIce
- r
eMoVe
D
oor
t
rIM
on page 11).
3. Remove the glass door (see
M
aIntenance
anD
s
erVIce
- G
lass
D
oor
r
eMoVal
on page 11).
4. The components can be accessed behind the right liner panel. Loosen the two (2) bolts on the right liner retainer
using a 5/16” socket until it can be removed. See Figure 18.
5.
Remove the right liner from the firebox. See Figure 19.
6. Using a T20 screwdriver remove the 12 screws from the black cover plate on the firebox side to gain access
to the valve, IFC, and fuse.
Loosen
Figure 18: Liner Retainer Removal
Figure 19: Right Liner Removal
F
use
R
ePLacement
:
1. Disconnect electrical power to the unit.
2. Remove component backpack (see
M
aIntenance
anD
s
erVIce
- c
oMPonent
B
ackPack
r
eMoVal
on page 13). If the
unit is already framed into the wall, refer to
M
aIntenance
anD
s
erVIce
- c
oMPonent
a
ccess
a
fter
I
nstallatIon
on page 15.
3. Remove the fuse cover by removing the two
T-20 screws (see Figure 20).
4. Remove the fuse by removing the two T-20
screws if they appear damaged.
5. Reconnect power to the unit.
Figure 20: Fuse Removal
