Uponor SYSTEMpro 311, Руководство по установке

Страница: 3 / 107

TABLE OF CONTENTS
INTRODUCTION
Control Overview .................................................................... 3
Navigating the Control ........................................................ 4-6
Viewing the Status of the System Performance .......... 7-12
Mixing Reset Mode ........................................ 7-9
Snow Melt Mode ........................................10-12
INSTALLATION
Step 1 – Checking Contents ................................................ 14
Step 2 – The Control Base .............................................. 15-17
Step 3 – Rough-In Wiring ...................................................... 18
Step 4 – Attaching the Control to the Base ...................... 19
Step 5 – Mounting the Sensors .................................... 20-22
Step 6 – Electrical Connections to the Control ............ 23-28
Powered Input Connection ............................ 23
Output Connections .................................. 24-25
Sensor Connections ........................................ 26
Unpowered Input Connections .................... 27
Temperature Resistance Chart ...................... 28
Step 7 – Testing the Wiring ............................................ 29-32
Test the Sensors .............................................. 29
Test the Power Supply .................................... 30
Test the Powered Demand Inputs ................ 30
Test the Outputs ........................................ 30-32
Step 8 – Completing the Installation .................................. 33
PROGRAMMING
Step 1 – Programming the Control .............................. 35-55
DIP Settings ................................................ 35-36
Programming the "Misc" Menu .................... 37
Programming the "Adjust" Menu............ 38-55
A. Boiler/High Temp Zone Settings.... 38-41
B. DHW Settings.................................... 42-43
C. Mixing Device Settings.................... 44-49
D. Snow Melting Settings.................... 50-53
E. Boiler Operation Settings ................ 54-55
Step 2 – Test Sequence .................................................... 56-57
CONTROL FUNCTION OVERVIEW
Section A – General .............................................................. 59
Section B – Boiler / High Temp Zones .......................... 60-62
Section B1 – General ................................ 60-62
Section B2 – Boiler Demands ........................ 62
Section C – Domestic Hot Water (DHW) ...................... 63-66
Section C1 – General ................................ 63-64
Section C2 – DHW Priority ........................ 65-66
Section D – Mixing Zones .............................................. 67-71
Section D1 – General ................................ 67-69
Section D2 – Mixing Devices.................... 69-70
Section D3 – Mixing Demands ................ 70-71
(Continued on page 2)
1
INTRODUCTION
INTRODUCTION - Table of Contents
IMPORTANT NOTE:
If you are not familiar with how
the Wirsbo SYSTEMpro 311
operates, or the theory behind
settings for a radiant system it is
important you review the Control
Function Overview. It will help
with understanding the functions
of the control within the hydronic
radiant heating system.
Quick Guide
If you are only INSTALLING
the SYSTEMpro 311 go to:
INSTALLATION
Steps 1-8
If you are only PROGRAMMING
the SYSTEMpro 311 go to:
PROGRAMMING
Steps 1-2