Uponor SYSTEMpro 311, Руководство по установке

Страница: 16 / 107

14
INST
ALLA
TION
INSTALLATION - Step 1 - Checking Contents
INSTALLATION - STEP 1
CHECKING CONTENTS
Check the contents of this package.
The Wirsbo SYSTEMpro 311 should have:
One SYSTEMpro 311
(A3040311)
One Outdoor Sensor
(A3040070)
Two Universal Sensors
(A3060071)
One Product Manual
If any of the contents listed are missing or damaged,
please contact your wholesaler or your Wirsbo sales
representative for assistance.
Control Optional Components
(sold separately)
DHW Sensor
(A3060071)
Remote Display
(A3040040)
Snow Melt Enable Kit
(A3040039)
CAUTIONS AND
DISCLAIMERS
Failure to install and/or
operate this control
properly could result in:
• Damage to the
equipment
• Personal injury
• Property damage
It is up to you to make
sure this control is
installed safely in a way
that meets all codes and
standards that apply.
Do not use this electronic
control as a primary limit
control. Other controls
that are meant to be used
and certified to be used
as safety limits must
be placed into the
control circuit.
Carefully read the
Control Overview (page 3)
to make sure you have
chosen the proper control
for your application.
Warning Symbol: Indicates
presence of hazards which
can cause severe personal
injury, death or substantial
property damage if ignored
SYSTEMpro
™ 311
Installation Manual
7 9 8