Uponor SYSTEMpro 311, Руководство по установке

Страница: 100 / 107

Error Messages
The control was unable to store a piece of information into its
EEPROM. This error can be caused by a noisy power source.
The control will display the error message and will continue to
operate as normal. Pressing either the Menu or Item button will clear
this error.
(See fig. a)
The control was unable to read a piece of information stored in the
Adjust Menu. Because of this, the control was required to load the
factory settings into all of the items in the Adjust Menu. The control
will stop operation until all of the items available in the Adjust Menu
of the control have been checked by the user or installer.
(See fig. b)
NOTE: Access level must be set
to ADV in order to clear the error.
The control was unable to read a piece of information stored in the
Miscellaneous Menu. Because of this, the control was required to
load factory settings into all of the items in the Miscellaneous Menu.
The control will continue to display the error message until all of the
items available in the Misc Menu of the control have been checked
by the user or installer.
(See fig. c)
NOTE: Access level must be set
to ADV in order to clear the error.
An incorrect device has been connected to the (tN2) input terminal.
To correct this error, ensure that the correct device is being used.
Once the problem has been corrected, press either the Menu or Item
button to clear the error message from the control.
(See fig. d)
98
APPENDIX IV
APPENDIX IV - Error Message Overview
a
b
c
d