Unox MINDMaps BAKERTOP, Руководство по обслуживанию

Страница: 61 / 216

COrE prOBE OffSET
Offset of the core temperature probe
(expressed in Celsius degrees and
multiply by 10)
from -50 to +50 0
dATE ANd TIME
It allows to select date, time, time zone,
daylight saving time function and auto-
set of date and time.
- -
dELTA TEMp prECOOL
ΔT = Tch - Tsp at which the pre-cooling
function is stopped
10 to 40 10
dEvICE INfO
Shows model, s/n, electronic board
installated and FW versions of each
board
Shows model, s/n,
electronic board
installated and
FW versions of
each board
dETErgENT QUANTITy
Percentage of variation on a time
based relation of the chemical pump
activation
from 20 to
200
100
drAINAgE COOLINg
Activate/Deactivate the cooling of the
drain (it is an extra accessory equipped
with a water valve which sprays fresh
water in the drain pipe)
OFF/ON OFF
dry.MAXI INHIBITION
Deactivation or limitation of the DRY.
Maxi. If set on:
OFF: standard DRY.Maxi activation
Low: DRY.Maxi activation only if set to
100%
HIGH: DRY.Maxi activation only during:
Humidity Calibration, Cleaning Cycle,
5 seconds to the end of the cooking
program.
OFF
LOW
HIGH
OFF
ELEC. pOWEr LIMIT
The oven can adjust the absorbed
electrical power according to the
number of turns of the heating
elements activated:
USE BOTH: all the 3 turns are activated
(100% o f the electrical power available)
USE ONLY HIGH: just the external and
internal turns are activated
USE ONLY LOW: just the medium turn
is activated
The portion of power limited by using
USE ONLY HIGH and USE ONLY LOW
parameters depends on the distribution
of power of the heating element
USE BOTH
USE ONLY
HIGH USE
ONLY LOW
Available only on
AMC mode
EXpO MOdE
Activate/Deactivate the heating
elements (in the electric units) or the
gas system
ON/OFF OFF
fLOOr/BACK prOBE
OffSET
from -50 to
+50
0
Offset of the floor temperature probe
(expressed in degrees celcius and
multiply by 10)
61