Unox MINDMaps BAKERTOP, Руководство по обслуживанию

Страница: 60 / 216

CEIL
ING
/BOTTOM
prOBE OffSET
Offset of the ceiling temperature probe
(expressed in Celsius degrees and
multiply by 10)
from -50 to +50 0
CEILINg
CHAMBEr
prOBE OffSET
Offset of the ceiling temperature probe
(expressed in Celsius degrees and
multiply by 10)
From -50 to 50
0
CHAMBEr prOBE
OffSET
Degrees celcius offset of chamber
probe (each 0.1 °C corresponds to 1 unit
in the parameter)
From -50 to 50 0
CONSUMABLE prICES
It allows to set an unitary value of
the following quantity:
■ ENERGY PRICE
■ GAS PRICE
■ WATER PRICE
■ DETERGENT PRICE
In this way the oven in the
consumption data section will show
you the cost of the programs run.
- -
CONSUMpTION dATA IN
CUrrENCy
It allows to translate the quantity of
the consumption data in cost
OFF/ON OFF
COrE prOBE OffSET
Degrees celcius offset of resistor probe
(each 0.1 °C corresponds to 1 unit in the
paramete
r)
From -50 to 50 0
CHAMBEr prOBE
OffSET
Celsius degrees offset of chamber
probe (each 0.1 °C corresponds to 1 unit
in the parameter)
From -50 to 50
0
COMBUSTION HEAT
UNIT Of MEASUrE
Allow to select the unit of
measurement of the heating value
kWh/smc – Mj/
smc – BTU/scf
kWh/
smc
COOKINg
BEfOrE
WASHINg
Number of Pollo cooking programs
you can run before a washing program
is required (if this parameter is activate
you can choose between medium or
long washing cycle only)
from 1 to 99
7
COrE prOBE
If it is Off the core probe is deactivated.
If it is
MONO
(standard value for ONE
ovens) the oven expects to have a single
point core probe.
If it is MULTI (standard value for PLUS
ovens) the oven expects to have a multi
point core probe.
Only for pLUS ovens it is possible to
use a multi or mono point core probe
indistinctly.
Off /Mono /
MuLt I
Mono (for on E
ovens)/MuLt I ( for
PLuS ovens)
60