36
Stripy or grainy defects on the
printed model
LCD panel may be over heated. Let it cool or follow
the guidance to replace the LCD panel.
Return to the factory for repair.
Black spot or black bar appears on the screen
The tension of the resin tank film is not strong
enough
Problems
Reason
Solutions
5
6
7
8
Edge warp defects on the printed
model
Liquid or solid resin residue appear
on the screen surface
There are wavy lines on the XY plane
Replace with a new resin tank and increase the
cooling time properly for the next print
Replace with a new resin tank and clean the
residual resin on the screen
Follow the guidance to manually add the supports
Check the first layer slice for any error
Problems with supports structures
Solid resin residue on the bottom of the build
platform causes damage to the resin tank film
Wrinkles on the resin tank film
The model bottom is not pressed to the XY plane
tightly
