23
• This box is checked by default. The system will recalculate the foundation when the user
finishes and quit the function of editing supports manually.
• Support Angle, Supports will be generated when the angle between the model part surface
and the horizontal direction is smaller than the support angle, otherwise they will not be
generated. The bigger the support angle is, the wider the scope of generating support. Set this
value to prevent generating supports at steep places and to eliminate unnecessary supports.
You can manually set the angle ranging from 45°to 75°, and the default angle is 60°
• Tilt Angle, To ensure discontinuous exposure in part area under the UDP mode, supports need
to be tilted. Users can manually set the tilt angle ranging from 0°to 20°, and the default angle
is 0°.
