UniPOS Repeater IFS7002R
Instruction Manual Page 18
Revision 2/16.11.09 Of 62
8.2.2.
Text messages
•
Upon fatal system errors the
following information screen
is displayed (the first line of
the text messages is
information intended for the
service staff):
The screen suppresses all other text
indications and can not be
suppressed.
•
For all other fault conditions a
table, containing information
on the number of fault events
(and the number of disabled
devices) is displayed. The
first line of the tables’ left
column displays the total
number of fault conditions;
the first line of the table’s
right column displays only the
number of faults in outputs
(monitored outputs and
addressable output devices):
To display the text message for each
fault condition, enter Information and
Control Mode (see section 9.2.1).
8.3. Using the keypad
None of the buttons is active upon fatal fault condition.
For all other fault conditions 2 buttons are being supported.
Button
Access
Level
Action
Description
“Stop
Alarm”
All
Press the button once to switch the
local sounder of the repeater. The
button on the screen is active too.
Press the button again to switch off
the local sounder of the connected
fire control panels to the repeater
and the button disappears from the
display.
The button is removed when:
-Twice pressing.
-Elimination of faults.
Button is active again when
registering new fire or fault in
connected fire control panels.
“Menu”
All
Press
the
button
to
enter
Information and Control Mode.
Where the fire control panel operates in combination of other conditions, their buttons are active too.
Fault condition
Restart, please
Mode DAY
REP ActInp:0000
REPEATER IFS7002R
UniPOS
Thu 25 Aug 2011
11:48:24
Faults total: 00000/00000*
Disables total: 002
Failed Outputs: 00000
Disabled Outputs: 001
