UniPOS Repeater IFS7002R
Instruction Manual Page 11
Revision 2/16.11.09 Of 62
The display shows the logo of the
company-producer, information on the
current local time and the mode of
operation of the fire control panel (DAY
or NIGHT), the mode of control (Rep –
control of the repeater or RemX –
control of a remote panel, where X is
the remote panel’s address.
In REP mode the displays shows
information from all fire control panels
connected with the repeater.
In RemX mode it is shown only
information about fire control panel „X”.
6.3. Using the keypad
Button
Access
Level
Action
More information
“Menu”
All
To enter Information and Control
mode (item.9)
Login menu “Lists”:
- Faults
- Repeater configuration
- Repeater parameters
- Choice Rep/Remove Panel
7. Fire condition
7.1. Description
The repeater enters Fire condition after a fire detector has been activated in one of zones of the Fire
control panel/panels connected with it.
The repeater can be in Fire condition:
-
One or more zones from one remote fire control panel.
-
One or more zones from different remote fire control panels.
To exit this condition press button
(“Reset Fire”) (Access Level 2 or higher).
The repeater remains in Fire condition until all Fire conditions in each of the fire control panels
connected with it is reset.
7.2. Indication
7.2.1.
LED and sound indication
In this condition the common light indicator illuminates in red flashing light
(Fire condition).
The local sounder produces discontinuous signal (0,5s sound, 0,5s break), if the device has not been
suppressed by button
(Stop Alarm).
7.2.2.
Text messages
Mode: DAY REP. ActInp 0000
REPEATER IFS7002R
UniPOS Ltd
Thu 25 Aug 2011
11:43:13
