UniPOS Repeater IFS7002R
Instruction Manual Page 42
Revision 2/16.11.09 Of 62
Mode DAY
REP
14:18:38
Wed 24 Aug 2011
Parameters CAN object
Name CAN object Building#2
Priority communic.level:
Slave
CAN communication port:
CAN
CAN Type of connection:
Direct
CAN address:
3
CAN Address of retransmitting station: 0
2
С
1
0
3 4 5 6 7 8 9
Mode DAY
REP
14:18:38
Wed 24 Aug 2011
Set Up Add New CAN Object
New CAN object is added to the repeater
Total connected CAN objects: 3
>>
Name CAN object
Parameters CAN object
Communic. options CAN object
•
Enter the name of the
added CAN object in submenu Name
CAN Object (
Example: “Building#1
”).
•
Screen “Parameters CAN
object”
Enter the new CAN object parameters
in this menu:
-
The field “Priority
communic.level” specifies the
place of the described remote
object (repeater/fire control
panel) within the structure of
the network Master or Slave.
-
The type of the connection
points the way of connection.
If the connection is
direct
–
the objects are connected to
the same CAN in the field
address of the repeater. The
default value is 0. In the case
of connection that connects
objects from CAN1 to CAN2 enter the address of the fire control panel that has to perform it.
In this event the type of connection in the field CAN has to be changed.
Communication port:
Via a retransmitting station
.
-
Enter the address of the retransmitting station – as CAN – address of the object –
retransmitting station in the network If the connection is executed via a retransmitting station.
This object – retransmitting station should be also described as connected in the CAN network
to the repeater.
•
Screen “Communication options CAN object” includes menu, which gives possibility for setup
of the functionality of remote fire control panel and factical datas, which the panel (adjusted
CAN object) and repeater exchange.
The parameters correction is done via button
. For exit button
(“Cancel”) or
(“Exit”).
This menu is with there screens, which parameters can be changed alternatevly to “Yes” or “No”.
