Unigraf UCD Console, Руководство пользователя

Страница: 24 / 58

Virhe. Määritä Aloitus-välilehdessä Heading 1, jota haluat käyttää tähän kirjoitettavaan
tekstiin.
24.
EDID Tab
EDID Tab provides tools for accessing the EDID of the UCD-400 Sink presented to the
Upstream Source Device. There are three basic functions:
•
Load and save EDID data files in the host PC
•
Edit the EDID contents
•
Program and read the contents of the hardware EDID memory
EDID Files
With Load… and Save as… you can read and write a hex EDID file from your PC. Please
note that the program does not alter the contents of the EDID file or verify its integrity
during load and save operation.
Note Four blocks (512 bytes) of EDID code is read. If the device is not supporting all
four blocks, the non-supported area is replaced with zeroes.
Currently the EDID Editor does not support Display ID. You can however modify
hex EDID files with the HEX Editor or load and program externally generated hex
EDID files that have Display ID content.
HEX Editor
When EDID content is either loaded from a file or read from the hardware EDID memory,
it is shown in the
EDID Data panel on the left hand side of the dialog. You can edit the
EDID contents by typing over the existing values. The altered content is highlighted with
RED . Please note that Hex Editor itself does not alter the contents of the EDID data or
verify its integrity.
Once you are done with editing the data, you can either save it to an *.ecd file in your PC
with
Save as… or program it to the hardware EDID memory with Write .