Virhe. Määritä Aloitus-välilehdessä Heading 1, jota haluat käyttää tähän kirjoitettavaan
tekstiin.
14.
Launch web browser on your PC. If you are using Ethernet connection, please make sure
that your PC is connected to the same network as your UCD-400 unit.
Access the HTML programming interface by entering the IP address assigned for your
UCD-400 unit.
Browse
Hardware File Name
for UCD-400 update (e.g.
a10_dptrx_p1.flash
) and then
press “Upload” button
Once uploading process done – cycle power on the UCD-400.
Note
Please cycle the power on the UCD-400 unit to enable the FW update.
Содержание UCD Console
Страница 1: ...UCD Console for UCD 400 User Manual ...