Close Control Regulation Program
6 06MC0071@00B0110
01/10/2012
INSTALLATION AND MOUNTING
Fig. 1
Fig. 2
CONFIGURATION
The UTS01 is configured by the manufacturer for the more common user requirements. Nonetheless, some
settings can be changed, so as to adapt the device to specific needs.
The menus can be accessed by pressing any point on the touch-screen together with the
ј
(up) and Prg buttons
for at least one second. Alternatively, press the
ј
(up) /
љ
(down),
(enter) buttons together for at least one
second.
The following operations exit the menu:
1. pressing
the
Esc button;
2. automatically 1 minute after a button was pressed or the touch-screen touched;
3. pressing the “X” symbol when displayed at the top right.
As shown in the Fig. 5 in the “Screens” section at the end of the document, the buttons that can be used during the
configuration phase are also visible on the right side of the display:
Fig. 5
Panel mounting
