Close Control Regulation Program
06MC0071@00B0110
01/10/2012
25
STATUS MENU DESCRIPTION
This part of the program allows the information regarding unit operation to be displayed; only information and data
appear relative to the configuration chosen. Icons indicating their use appear on the main screen. To access them,
touch the icon desired on the display and the operation will appear in read only without having to insert a password.
SETPOINTS
This screen and the following one are used to check the set point and
the other calibration parameters for the correct operation of the unit.
These parameters are read-only and as a result the values cannot be
changed.
To set the values, access the parameters in programming mode and
enter the "SETTINGS" password.
All variables are pre-set in the factory so that the control functions
correctly, maintaining standard conditions the room temperature.
SOFTWARE INFO
This manual describes the standard regulation characteristics for air
conditioning units. Some characteristics of special-order units may be
different from those described in this manual.
This screen and the following display the software version, bios, boot
and unit serial number.
This information is essential when adding a new unit to a group of
units connected in the LAN, as all the controllers must have the same
program version.
When contacting a service centre, the version of the control program
saved on the control board must be indicated precisely.
Status Menu
