Unicorn Digital Timepiece, Руководство пользователя

Страница: 38 / 101

F R O N T P A N E L S E T T I N G S
38
WORD 256X/LTC
Choose this setting when you want the Digital
Timepiece to use word clock generated by a
Digidesign hard disk recording system as a time
base reference, while SMPTE time code (LTC)
being generated by either the same system or a
different device serves as the time code address
master.
WORD 1X/VIDEO/INTERNAL
Choose this setting when you want the Digital
Timepiece to use an external word clock device as a
time base reference, and you would also like the
Digital Timepiece (and, optionally, the external
word clock source) to be referenced to house sync
video. The Digital Timepiece itself serves as the
SMPTE time code master.
This mode allows the Digital Timepiece to phase
lock to a Word 1x input, while at the same time
referencing to a house sync to keep itself
frame-locked with video.
This mode is recommended when you would like
to synchronize the Digital Timepiece with another
word clock device while referencing both devices
to house sync.
For an example of how this mode can be used, see
“Pro Tools and Triple-sync” on page 91 and
Figure 12-7 on page 90.
WORD 1X/VIDEO/MTC
This mode is similar to “Word 1x/Video/Internal”
above. Choose this setting when you want the
Digital Timepiece to use an external word clock
device as a time base reference, and you would also
like the Digital Timepiece (and, optionally, the
external word clock source) to be referenced to
house sync video. In this mode, however, a device
other than the Digital Timepiece serves as the
address (SMPTE) master, and the Digital
Timepiece slaves to MIDI Time Code (MTC) fed to
it from the master address source.
For an example of how this mode can be used, see
“Using house sync with the Digital Timepiece and
a DA-88/SY-88 (“Triple-sync”)” on page 21 and
Figure 3-14 on page 21.
For another example, see “Pro Tools and Triple-
sync” on page 91 and Figure 12-7 on page 90.
WORD 1X/VIDEO/LTC
This mode is similar to “Word 1x/Video/Internal”
above. Choose this setting when you want the
Digital Timepiece to use an external word clock
device as a time base reference, and you would also
like the Digital Timepiece (and, optionally, the
external word clock source) to be referenced to
house sync video. In this mode, however, a device
other than the Digital Timepiece serves as the
address (SMPTE) master, and the Digital
Timepiece slaves to SMPTE Time Code (LTC) fed
to it from the master address source.
For an example of how this mode can be used, see
“Using house sync with the Digital Timepiece and
a DA-88/SY-88 (“Triple-sync”)” on page 21 and
Figure 3-14 on page 21.
For another example, see “Pro Tools and Triple-
sync” on page 91 and Figure 12-7 on page 90.
WORD 1X/VIDEO/VITC
This mode is similar to “Word 1x/Video/Internal”
above. Choose this setting when you want the
Digital Timepiece to use an external word clock
device as a time base reference, and you would also
like the Digital Timepiece to be referenced to video.
In this mode, however, VITC (vertical interval time
code) embedded in the video input serves as the
address (SMPTE) master, and the Digital
Timepiece slaves to it.
WORD 1X/VIDEO/SONY
This mode is similar to “Word 1x/Video/Internal”
above. Choose this setting when you want the
Digital Timepiece to use an external word clock