Unicorn Digital Timepiece, Руководство пользователя, Страница: 78 / 101

D I G I T A L T I M E P I E C E & O T H E R S E Q U E N C E R S
78
Recording
Once you’ve record-armed a track on any device
connected to the Digital Timepiece, using either
ClockWorks or your sequencer to do so, you are
ready to record. You can initiate recording from
either ClockWorks or your sequencer as follows:
1 In the main counter, type in the location where
intend to record (with appropriate preroll time).
This cues the Digital Timepiece to the correct spot.
2
Start recording by pressing the record button in
the main transports of either ClockWorks or your
sequencer.
MMC record feature summary
Most sequencers allow you to do the following by
MMC remote control:
■
Set the MMC record mode (rehearse, etc.)
■
Send MMC play, stop, locate and record
commands
■
Record-enable individual tracks on a device
What you cannot do in your sequencer with the
Digital Timepiece (but you can do with
ClockWorks):
■
Set a SMPTE offset for a device
■
Set individual track offsets for a device
■
Choose between analog or digital input on a
device
■
Set VTR record modes for Sony 9-pin devices
■
Set the monitor mode for a device ( All or Auto,
which monitors record-enabled inputs only)