Unicorn Digital Timepiece, Руководство пользователя, Страница: 74 / 101

D I G I T A L T I M E P I E C E & P E R F O R M E R
74
2
Take the Digital Timepiece and MIDI
Timepiece AV off line, and bring the DA-88/SY-88
on line.
3 Set Performer’s SMPTE start time to match the
SMPTE offset in the DA-88.
You are now ready to use the transport controls and
cueing features in Performer to remotely control
the SY-88 card. When you play, stop, and cue
Performer, everything will follow in sync.
Performer slaves to MTC from the Digital
Timepiece. The Digital Timepiece slaves to MTC
from the SY-88 card. And the SY-88 card responds
to the MMC messages sent from Performer.
Using Performer and the SY-88 with triple-sync
You can combine this procedure for controlling the
SY-88 card from Performer with the setup for
triple-sync shown in Figure 3-14 on page 21. Be
sure to include the following preparations:
1 Connect blackburst to the video input of the
DA-88 and Digital Timepiece (and any other
devices you wish to reference to house sync).
2
Set the front panel Clock setting of the DA-88 to
Video .
3
Set the Digital Timepiece’s time base mode to
Word 1x/Video/MTC .