Unicorn Digital Timepiece Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 101

Unicorn Digital Timepiece Скачать руководство пользователя страница 75

CHAPTER

75

10

Digital Timepiece & Other

Sequencers

OVERVIEW

If you have another sequencer, we strongly urge
you to switch to Performer or Digital Performer.
(Sorry. We couldn’t help that one.)

But if you decide to stick with what you have, you
can still enjoy many of the features the Digital
Timepiece has to offer.

This chapter applies to sequencers running on any
computer platform (Mac, Windows, SGI, etc.)

Getting the Digital Timepiece to work with your
sequencer involves the following:

■

Getting your sequencer to communicate with

the Digital Timepiece

■

Slaving your sequencer to MIDI Time Code

generated by the Digital Timepiece

■

Cueing, starting and stopping the Digital

Timepiece from your sequencer’s transport
controls

■

Sending record-enable commands and other

MMC record functions from your sequencer to
devices connected to the Digital Timepiece

■

Triggering video streamers from your sequencer

(if it supports Mark of the Unicorn’s Video Time
Piece streamer implementation)

Establishing communication . . . . . . . . . . . . . . . .75

Slaving your sequencer . . . . . . . . . . . . . . . . . . . . .75

Using your sequencer as transport master. . . . .76

MMC record commands . . . . . . . . . . . . . . . . . . . .77

ESTABLISHING COMMUNICATION

The Digital Timepiece is a standard MIDI device
that can be connected to a MIDI interface. Just be
sure to connect it bidirectionally (both MIDI IN
and MIDI OUT) as shown in Figure 3-3 and
Figure 3-5 on page 15 so that there is two-way
communication between your sequencer and the
Digital Timepiece.

If you have a Macintosh, you can alternately
connect the Digital Timepiece directly to one of the
Mac’s two serial ports as shown in Figure 3-2 on
page 15.

Once you’ve made the hardware connections,
establish MIDI communication between your
sequencer and the Digital Timepiece in the same
fashion that your sequencer does so for any MIDI
device.

If you’ve connected the Digital Timepiece directly
to a Macintosh, treat it as a standard 1 Mhz MIDI
interface in your sequencer.

If you are using your sequencer with OMS, refer to
chapter 11, “Digital Timepiece & OMS” (page 79)
for details about how to add the Digital Timepiece
to your OMS setup.

SLAVING YOUR SEQUENCER

In order to synchronize the two, you must slave
your sequencer to the Digital Timepiece. Follow
the normal procedure in your sequencer for slaving
it to MIDI Time Code.

«
...
73
74
75
76
77
...
»

Содержание Digital Timepiece






































































































Отзывы:

Нет отзывов