Ulvac VD151, Инструкция по эксплуатации

Страница: 9 / 68

YK08-0028-DI-002-08
viii
CAUTION
1) Do not attempt to put your hand or article in the opening of the motor;
you have a risk of getting electrical shock, injury or casing a fire.
2) Do not touch any rotary section such as the motor, main spindle or
spindle joint during operation of the Vacuum pump; it shall bring in
injuries.
3) Strictly refrain from putting any combustible substance in and around
1m of the motor and Vacuum pump; there is a risk of getting a fire.
4) Do not put a wall or obstacle in and around 0.1m of the air outlet of the
motor (Motor edge face). You have a risk of getting burned or fire
caused by over heat.
Power Supply wiring <Dismantling>
WARNING
Be sure to cut off the electricity before starting install or dismantling
operation.
Inlet piping <Dismantling>
WARNING
1) Take off the piping following the Install Manual of the system.
2) The Inlet piping remains very hot wile after having stopped the Pump.
Be sure to take it off after the Pump has sufficiently cooled down.
3) Make airtight completely the Pump exhaust outlet with a blank flange.
Transfer
WARNING
Pump Weight
ＶＤ１５１： 29kg
ＶＤ２０１：
34.5kg
When you carry a pump, you have a risk of giving damage to your back.
Be sure to use the loading machinery (such as mobile crane) to lift up
the Pump or load it on the pallet and fix it and run the Pallet truck for its
transfer.