30
YK18-0012-AI-101-02
4.4 Connecting G-TRAN
If a wrong connector is chosen, the connected device may possibly be
damaged.
Since there is a terminal that outputs DC24V, and if a wrong connector is
chosen, the connected device may possibly be damaged, therefore, carefully
check the connection destination.
It is possible to simply display G-TRAN output operation value by connecting Ulvac transducer type
vacuum gauge G-TRAN series to this machine.
4.4.1 Setting of G-TRAN
1
．
Check that the operation status is "STOP."
Setting for G-TRAN cannot be allowed except for "STOP" condition.
2
．
Connect a corresponding G-TRAN to any of D-PG, D-IG, or D-CC of the connector panel.
Figure 17 Connector panel G-TRAN connector
D-PG
D-CC
TMP
D-IG
CNSIL
AC-IN
CP
NOTES
