31
YK18-0012-AI-101-02
Table 18 List of connector panel and corresponding G-TRAN models.
Connector
Corresponding G-TRAN
models
Remarks
D-PG
SW-1-1
、
SP1
、
CCMT-D
For vacuum gauges not requiring filament or turning
ON/OFF operation for electric discharge
D-IG
SH2-1
、
ST2-1
、
SC1
For vacuum gauges requiring filament or turning ON/OFF
operation for electric discharge
D-CC
CCMT—D
※
1
For connecting CCMT-D using the cable GDC-xxx for
display.
*1: Connect it to D-PG when using the display cable dedicated to CCMT-D
3
．
Press Menu on the Main screen to display the Menu screen.
4
．
Select a G-TRAN model to be connected by P1 and P2 on the Menu screen.
Figure18 Menu screen and G-TRAN models on the P1 and P2 screen.
Switch
Corresponding G-TRAN models
Description
P1
SH2-1
、
ST2-1
、
SC1
The output operation value for selected G-
TRAN is indicated on the P1 and P2 pressure
display section on the Main screen.
P2
SW-1-1
、
SP1
、
CCMT-D
NO USE
－
When the P1 and P2 pressure display is not
used.
etc.1
、
etc.2
－
For displaying the operation result of the
function
SH2 and ST2 are shipped in combination mode with the Pirani gauge SPU.
When using in other combinations or as a single unit, the SH2 / ST2 device must be set.
