9
YK18-0012-AI-101-02
Figure 3 Name of the connector panel
Table 2 Name of the connector panel
Name
Description
1
AC INPUT connector
It is the primary side power supply input section of the main unit of
the machine.
2
MAIN POWER switch
It is the main power supply switch.
3
Circuit protector
Shuts down the power supply when the main power supply is
overloaded.
4
D-IG connector
It is an ionization vacuum-gauge import connector.
Supports following G-TRAN models.
ST2-1
、
SH2-1
、
SC1
5
D-PG connector
It is a low-vacuum area vacuum-gauge import connector.
Supports following G-TRAN models.
SW1-1, SP1
6
D-CC
It is a capacitance manometer import connector.
Supports following G-TRAN models.
CCMT-D
7
CNSIL
It is a device operation signal input connector. Following operations
are performed.
Input of START interlock signal.
Input of ionization vacuum gauge filament FIL1/FIL/2 switchover.
◆
Arrange a non-voltage contact for the input signals.
8
D-TMP
Histories etc can be checked by connecting to TMP via RS485
communication using the
I/F cable and communication cable for
UTM70B. For more details, refer to TMP instruction manual.
▶
Product summary
D-PG
D-CC
D-TMP
D-IG
CNSIL
AC-IN
CP
1 2 3 4 5 6
