13
YK18-0012-AI-101-02
2.4.6 P1 setting screen
If a wrong connector is chosen, the connected device may possibly be
damaged.
Since there is a terminal that outputs DC24V, and if a wrong connector is
chosen, the connected device may possibly be damaged, therefore, carefully
check the connection destination.
It is used for setting a device of which output operation value is indicated on the P1 display
section. The item currently selected turns on the light.
Figure 9 P1 setting screen
Table 9 Explanation of P1 setting screen
Name
Description
1
ST2/SH2
only switch
The output operation value for ULVAC vacuum gauge G-TRAN is
indicated (for high-vacuum).
<Target devices>
ST2/SH2 only: For using in ST2, SH2 single unit mode.
ST2/SH2 combi: For using in ST2, SH2 combination mode
SC1
2
ST2/SH2
combi switch
3
SC1 switch
4
NO USE switch
When the P1 display section is not used.
5
etc.1
、
etc.2
When the operation result of the function is indicated in the P1 display
section.
6
Return switch
Returns to the Main screen.
2.4.7 P2 setting screen
If a wrong connector is chosen, the connected device may possibly be
damaged.
Since there is a terminal that outputs DC24V, and if a wrong connector is
chosen, the connected device may possibly be damaged, therefore, carefully
check the connection destination.
It is used for setting a device of which output operation value is indicated on the P2 display
section. The item currently selected turns on the light.
Figure 10 P2 setting screen
▶
Product summary
①
②
③
④
①
②
③
④
NOTES
NOTE
