28
30A215-Mar2008
29
30A215-Mar2008
7. PRODUCT LED
a.
BLINKING fast in “operating” mode indicates cooking of that product is in process.
b. When lit (bright) in “programming” mode indicates the product being programmed.
8. PRODUCT COOK AND PROGRAMMING KEY
a. In “operating” mode, used to start and stop a product cook cycle.
b. In “programming” mode, used to enter numerical value “3660” and select RECIPE PROGRAMMING MODE.
9. PROGRAMMING KEY
In “programming” mode, used to enter the numerical value of 9.
10.
DISPLAY
Displays modes, functions and operation of the computer.
11.
TOGGLE/PROGRAMMING KEY
In “programming” mode, used to enter the numerical value of 0 and “toggle” (switch) between choices being displayed.
B. DISPLAY DESCRIPTIONS
The actual shortening temperature in degrees Fahrenheit/Celsius when the key
is pressed, i.e.., 100˚F (38˚C).
Time remaining in a cook cycle or other computer function, ie., 10:00.
Time remaining in the BOIL mode, ie., 20:00.
Prompt to cycle power OFF at the end of the BOIL, FILTER, etc., functions
.
Indicate the specific Product Key number for which the computer is displaying status
information during a cook cycle.
STIR
1-8
Indicates an action needs to be taken on a product being cooked by a specific product
key such as STIR 5.
MELT E
Default Electric Melt Cycle - Heating mechanism is ON 4 seconds and OFF
36 seconds.
MELT G
Default Gas Melt Cycle - Heating mechanism is ON 8 seconds and OFF
32 seconds.
MELT P
Default Purge Melt Cycle - Heating mechanism is ON 12 seconds and OFF
28 seconds.
TURN OFF
Indicates the Computer is ready to be turned ON.
NOTE: Computer must be turned OFF by the ON/OFF key before the ON/OFF key
can be used to turn the Computer ON.
TOO HIGH
Indicates an entered value is too low and is NOT ACCEPTABLE.
Indicates an entered value is too high and is NOT ACCEPTABLE.
CK
1-8
ACT
---
F/C
OFF
TOO LOW
---
:
---
BOIL
--
:
--
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
