uher sg 561 royal, Руководство по эксплуатации

Страница: 28 / 74

2.
2.1
input is for direct connection of all dynamic Stereo
microphones equipped with connecting For Stereo record-
ing with two dynamic mono microphones, UHER Adapter Lead K 626
be used. For extension: UHER Extension Lead K 110
with mono microphones, K with Stereo microphones.
For mono recordings, UHER Condenser Microphone M 646 be
connected directly. To connect two mono microphones for Stereo
recording, UHER Adapter Lead K 626 is needed. The yellow marking at
the end of the lead indicates the channel, the red marking the right
channel. To extend the connecting lead, use UHER Extension Lead
K 110 and UHER Adapter Lead K 626, in case the power supply
will be provided by the microphone's built-in battery.
2.2 Headphones Output (Fig. 5)
This socket is for connecting Stereo headphones that, UHER's
W 675 and W 775, are equipped with a 5-pin Connection of
headphones with LS-7 plugs, like UHER's W 674 and W 774, requires
the insertion of UHER Adapter K 633.
The headphones socket is equipped with contact Switches for shutting
the built-in loudspeakers of the machine out of Circuit; in which case
the notch of the plug ("a") be inserted into the socket so that it
points outward (Fig. A). the plug notch points inward (Fig. B),
back will be through the headphones and the loudspeakers simulta-
neously.
26
W 674
W 774
Fig.
5
Fig.
A
Fig.
B
2.3 Phono Input M (Fig. 6)
This input socket is for direct connection of Stereo record-players that
have DIN plugs and pickup cartridges. Record-players with
netic pickups may also be connected if they have a built-in equalizing
preamplifier. Moreover, by using UHER inter-unit lead K 541, the socket
may also to connect high-impedance input sources like a Stereo
tape or cassette recorder, a Stereo receiver or UHER mixer MIX 500
A