Uconnect 10.1 inch Display, Инструкция по эксплуатации

Страница: 78 / 178

UCONNECT MODES 77
Settings
Use this QR code to access your
digital experience.
Press the Settings tab to display the setting
screen. In this mode, the Uconnect system
allows you to access all of your programmable
features.
NOTE:
Depending on the vehicle’s options, available
feature settings may vary.
When making a selection, press the desired
menu on the touchscreen. Once in the desired
menu, press and release the preferred setting
until a check mark appears next to the setting,
showing that setting has been selected. Once
the selection is complete, press one of the other
buttons on the touchscreen to exit “Settings”.
Pressing the Up or Down Arrow button, or
dragging your finger on the touchscreen, will
allow you to scroll up or down through the
available settings and menus.
Refer to “Uconnect Settings” in “Multimedia” in
the Owner’s Manual for further information.
M
ODULE
U
PDATES
NOTE:
Be sure to accept updates in a timely fashion to
assure you are using the most up-to-date soft -
ware.
Module Over the Air Updates
The Uconnect 5/5 NAV has the ability for over
the air module updates to the system.
NOTE:
Over the air updates do not use Wi-Fi and use
data provided from the vehicle.
When a module over the air update is available
for the system, a pop-up will appear on the radio
stating new module updates are ready for the
Uconnect system.
NOTE:
Updates for the modules of the vehicle can only
take place when the vehicle is fully off.
Update Now
When the update software pop-up appears on
the radio, press the Update Now button on the
pop-up to update the software immediately.
The update will take place when the vehicle is
fully off.
Schedule Update
Use the Schedule Update option to set a
different time for the update to take place using
the touchscreen. Use the up and down arrows
on the touchscreen to input a desired time to
set a scheduled update. The update will happen
during scheduled time when the vehicle is fully
off.
NOTE:
The Schedule Update option can only be used
20 times for each update. After the 20th time,
the system will force the update when the
vehicle is turned fully off. The only option for the
Forced Software Update pop-up is to select
“OK”.
Once the update is completed, the system will
restart.
Software Over the Air Updates
The Uconnect 5/5 NAV has the ability for over
the air software updates to the system.
2
21_00_U52_EN_USC_t.book Page 77