41
User manual
In SCAN mode, RPM/SPEED/TM/DIST/CAL/PULSE will skip to display in every 6 seconds.
You can also press “Mode” button to select single function display except RPM & SPEED function.
The RPM & SPEED function will always switch display.
Independently from that, the function values will be displayed in the different areas on the bottom
display:
The function values:
The following values can be shown by the computer:
SPEED
The computer shows the current
speed
in the display.
TIME
Computer shows actual exercise time.
Preset a target time
You may preset a target time before starting a workout. The time will
then count down and multiple sound beeps will be emitted when
reaching 0:00. How to preset a target value, we have explained before.
DISTANCE
The workout distance is displayed here.
Preset
a
target
distance
You may preset a target distance before starting a workout. The
Distance will then count down and multiple sound beeps will be emitted
When reaching 0,00.
How to preset a target value, we have explained
before.
CALORIES (CAL)
The currently burned calories are displayed here.
Preset a target calorie consumption
You may preset a target calorie consumption (kcal) before starting a
workout. The calories will then count down and multiple sound beeps
will be emitted when reaching 0000 kcal. How to preset a target value,
we have explained before.
PULSE
The computer is showing the user’s heart rate in beats per minute.
For a correct display please ensure that you fully grasp the hand
sensors. It may last up to 2 minutes before the pulse frequency
will be measured correctly.
RPM
The computer shows the current
rounds/min
.
Further displays
the computer shows room temperature, clock and date in
Standby-mode.
