µ-Dimension BST 1200es, Руководство пользователя

Страница: 57 / 74

Dimension BST 1200es / SST 1200es User Guide
Maintenance 57
As Needed Maintenance
The following maintenance items have no routine schedule but
should be tended to as needed.
Remove Debris Buildup
Remove all material buildup on the Z Platform and around the lead
screw (
See “Lead Screw and Guide Rod Identification” on
page 48. ). Failure to do so could cause the base to not be level or
the Z Platform to jam at its upper limit.
Vacuum Build Chamber
Vacuum the build chamber to remove all foreign particles and
purged material.
Clean Door Glass
The door glass can be cleaned with any commercial glass cleaner.
Chamber Light Bar
Replace a chamber light bar when it burns out.
NOTE
There are two light bars in the modeling chamber. They are located
on the front wall of the chamber - one to the right, the other to the left
of the chamber door.
CAUTION
Use only a factory authorized
replacement light bar.
Use proper ESD grounding techniques
when handling electronic components.