µ-Dimension BST 1200es, Руководство пользователя

Страница: 36 / 74

36 Operation
Dimension BST 1200es / SST 1200es User Guide
Unloading Material
The model and support material cartridges may be replaced
separately or at the same time. In idle-, load-, or build-related
modes, the panel displays the percentage of material remaining in
the cartridges. If the printer will be operating unattended for a long
period, and the material level is getting low, you may want to
replace the cartridges before starting a new part. Of course, you
will also need to replace the cartridges when they are empty.
Unload material cartridges:
1. From
Idle
(or
Ready To Build
), Press
Load Material
.
A. The panel displays
Load Material
and prompts with,
Replace model ?
• Press
Yes
. to unload the Model Material.
The panel displays
Replacing model
,
• Press
No
if you do not wish to unload the model
material.
B. The panel then prompts with,
Replace support?
• Press
Yes
. to unload the Support Material.
The panel displays
Replacing support
,
• Press
No
if you do not wish to unload the support
material.
C. After you have made the above choices, the panel displays
Unloading
for approximately 2 minutes (the selected
materials will be unloaded from the extrusion head).
D. When unloading is complete, the panel will prompt you to
remove a cartridge based upon your choices - i.e.,
Replace Both Cartridges, Replace Model
(Top) Cartridge,
or
Replace Support (Bottom)
Cartridge
.