µ-Dimension BST 1200es, Руководство пользователя

Страница: 17 / 74

Dimension BST 1200es / SST 1200es User Guide
Setup 17
8. Remove the foam tubes that isolate the extrusion head from
the frame (see Figure 3 ).
Figure 3: Foam tubes isolating the extrusion head from the Z-axis frame
9. After unpacking, inspect the printer and report any shipping
damage to the carrier.
CAUTION
Remove the foam tubes that isolate the
extrusion head from the frame (see
Figure 3
). The printer will be damaged if
powered on with the foam tubes in place.
CAUTION
Be careful not to damage the rod sensors
when removing the foam tubes (see
Figure 3
).
Extrusion Head
Circles indicate
Rod Sensor loca-
tions. There is
also one sensor
on each side of
the Extrusion
Head.
Foam Tubes (4)