Tuttnauer 5050 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 87

background image

Page 6 of 85 Pages

pressure gauge indicates to the operator that there is pressure in the
chamber.
A deviation of +1.6% is accepted.

NOTE:
After operating the sterilizer, brown stains might appear on the bottom of
the chamber. These stains are a result of the heating elements that are
located at the lower external part of the chamber. The brown color is a
common phenomenon, can easily be removed, and will not have any effect
on the sterilized goods.

This  manual  is  intended  to  give  the  user  a  general  understanding  of  how
the autoclave works and indicates the best ways to operate and take care of
it  in  order  to  obtain  optimum  results  and  a  trouble-free  operation.  After
reading  this  manual,  operating  the  autoclave  should  be  straightforward.
However,  since the  autoclave  is  built  using  high  technology  sensitive
components,  no  attempt  should  be  made  by  the  user  or  any  other
unauthorized person to repair or recalibrate it.

Only technical personnel having proper qualifications, holding
technical documentation and adequate test instrumentation are
authorized to undertake repair or service.

1.1

Incoming Inspection
The  autoclave  should  be  unpacked  and  inspected  for  mechanical  damage
upon  receipt.  Observe  packing  method  and  retain  packing  materials  until
the  unit  has  been  inspected.  Mechanical  inspection  involves  checking  for
signs of physical damage such as: scratched panel surfaces, broken knobs,
etc.
If damage is apparent, contact your dealer or point of purchase, so that they
may notify the manufacturer and file a claim with the appropriate carrier.
All Tuttnauer products  are  carefully  inspected  prior  to  shipment  and  all
reasonable  precautions  are  taken  in  preparing  them  for  shipment  to  assure
safe arrival at their destination.

1.2

Warranty
We certify that this instrument is guaranteed to be free from defects in
material and workmanship for one year against faulty components and
assembly with the exception of glassware, lamps and heaters.
The warranty does not include and does not replace routine treatment
and preventive maintenance to be performed according to instructions
in paragraph 9.1 (Preventive and Scheduled Maintenance).

Our  obligation  is  limited  to  replacing  the  instrument  or  parts,  after  our
examination, if within one year after the date of shipment they prove to be
defective.  This  warranty  does  not  apply  to  any  instrument  that  has  been
subjected  to  misuse,  neglect,  accident  or  improper  installation  or
application,  nor  shall  it  extend  to  autoclaves  that  have  been  repaired  or
altered outside the factory without prior authorization from us.
The  Autoclave  should  not  be  used  in  a  manner  not  described  in  this
manual!

«
...
6
7
8
9
10
...
»

Содержание 5050
























































































Отзывы:

Нет отзывов

Похожие инструкции для 5050

Giraffe OmniBed

Бренд: Ohmeda Страницы: 54

Бренд: G-Systems Страницы: 60

Бренд: G-Lab Страницы: 16

Бренд: G&G Страницы: 2

Бренд: Tascam Страницы: 8

Бренд: Nautilus Страницы: 17

Бренд: National Instruments Страницы: 6

Бренд: GE Страницы: 37

Бренд: ubicquia Страницы: 4

Бренд: KERR Страницы: 32

BIO-FIGHTER 4Xtreme

Бренд: Dust Free Страницы: 8

Бренд: HF Scientific Страницы: 5

Бренд: Lightolier Страницы: 2

Бренд: Mueller Страницы: 2

Бренд: WENVY Страницы: 23

Бренд: Mac Medical Страницы: 12

Бренд: Jacassi Страницы: 5

KEYSTATION 61 MK3

Бренд: M-Audio Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды