Tuttnauer 2840 EL-D, Руководство по эксплуатации и техническому обслуживанию

Страница: 31 / 78

Page 30 of 77
8 PRINTER
8.1 Printer Output
The printing is on thermal paper with 24 characters per line and contains
the following information:
·
Date:
·
Time:
·
Ser. Num:
·
Model:
·
Version:
·
Cycle Num:
·
Cycle:
·
Ster Temp:
·
Ster Time:
When the sterilization cycle begins the printer starts printing the above
data.
After the preliminary printing, the autoclave starts performing the
sequence of operations of the cycle. The measured values of temperature
and pressure are printed at fixed time intervals, according to the phase of
the process, as shown in the table on the next page.
The data is printed from the bottom up, beginning with the date and
ending with "Cycle Ended". For an aborted cycle, "Cycle Failed" and the
Error message are printed (refer to "Displayed Error Messages/Symbols").
For an example of a typical printout, see next page.
Note: Please note that the print out goes from the bottom upwards.