Tuttnauer 2840 EL-D, Руководство по эксплуатации и техническому обслуживанию

Страница: 22 / 78

Page 21 of 77
4.2.2 Keypad
The keypad consists of three keys as described below:
UP key
This key has the following functions:
·
In the menu directories:
o
This key enables the operator to browse
through the cycles.
·
In the directories available:
o
When the cursor is blinking on a number,
the
UP ▲ key increases its value.
o
When the cursor is blinking on a menu
selection, the
UP ▲ key allows browsing
backward through the menu.
o
When adjusting a parameter and the cursor
is blinking on “SET” or “EXIT” the
UP ▲
key activates that procedure.”
DOWN key
This key has the following functions:
·
In the menu directories:
o
This key enables the operator to browse
through the cycles.
·
In the directories available:
o
When the cursor is blinking on a number,
the
DOWN ▼ key decreases its value.
o
When the cursor is blinking on menu
selection, the
DOWN ▼ key allows
browsing forward through the menu.
o
When adjusting a parameter and the cursor
is blinking on “SET” or “EXIT” the
DOWN ▼ key activates that procedure.
START/STOP key
This key has the following functions:
·
In the main screen:
o
Starts the process when the required
program was chosen.
o
Stops the current process.
o
Cancels the ERROR message displayed on
the screen and opens the electric door lock.
·
In the menu directories:
o
When the cursor is blinking on a number,
the
START/STOP key enables moving
to the next position.
o
When the cursor is blinking on a menu
selection, the
START/STOP key
activates that selection.