Tuttnauer 2840 EL-D, Руководство по эксплуатации и техническому обслуживанию

Страница: 10 / 78

Page 9 of 77
3 TECHNICAL DATA
3.1 Introduction
Model 2840 ELC is a table-top sterilizer designed especially for the
sterilization of instruments, liquids, and other materials in hospital
laboratories, medical laboratories, research institutes, food laboratories and
pharmaceutical facilities.
A computerized control unit ensuring a fully automatic sterilization cycle
controls the autoclave.
The temperature and pressure are controlled through sensors placed inside
and outside the media container or bottles.
A special feature of the ELC series is the option of a fast cooling stage for
liquids. In this stage pressure in the chamber is increased by means of
compressed air to compensate the fast decreasing of pressure due to the
fast cooling. The fast cooling shortens the time required for safe handling
of bottles.
Five automatic sterilization programs are available, according to the
material
to be sterilized.
The sterilizer has multiple built - in safety devices, which provides
adequate protection to ensure the safety of operating personnel.
On all models, a printer is an optional addition to the autoclave. The
printer prints the preset and actual parameters of the cycle (temperature,
time and pressure/vacuum).
The pressure scale, printer option and cooling method can be set up at any
time by a technician.
NOTE:
After operating the sterilizer, brown stains might appear on the bottom of
the chamber. These stains are a result of the heating elements that are
located at the lower external part of the chamber. The brown color is a
common phenomenon, can easily be removed, and will not have any effect
on the sterilized goods.
This manual is intended to give the user a general understanding of how
the autoclave works and indicates the best ways to operate and take care of
it in order to obtain optimum results and a trouble-free operation. After
reading this manual, operating the autoclave should be straightforward.
However, since the autoclave is built using high technology sensitive
components, no attempt should be made by the user or any other
unauthorized person to repair or recalibrate it.
Only technical personnel having proper qualifications, holding
technical documentation and adequate test instrumentation are
authorized to undertake repair or service.