21.19.
逻辑开关
Logic switches
逻辑开关
是由2个开关加数学逻辑关系组成的虚拟开关，来控制一
些功能的开启或关闭。可设定
3
组
逻辑开关
（
Lsw1, Lsw2, Lsw3
），选
择
SwA~SwH
进行组合，逻辑关系有
与
、
或
、
异或
，组合功能如下表所
示：
开关
逻辑关系
switch
logic relationship
开关
Swith1
开关
Swith2
和
And
或
Or
异或
Xor
关
off
关
off
关
off
关
off
关
off
关
off
开
off
关
off
开
on
开
on
开
on
关
on
关
off
开
on
开
on
开
on
开
on
开
on
开
on
关
off
例如设定固定翼飞机放轮子后再熄火，如图Pic21.27所示，点触选择了LSw1，SwA向上，Swb向上，逻辑关系为或，并
在辅助通道中设定SwA为放轮子，LSw1为熄火，此时拨动SwA向下放轮子，SwA向下加SwB向下才可以熄火。
(
Pic 21.28)
(
Pic 21.27)
The
logic switch
is a virtual switch which consists of two switches plus a
mathematical logicl relationship. The
logic switch
is used to control turning
on or turning off of some functions two switches control one function . There
are 3 sets of
logic switches
(Lsw1,Lsw2, Lsw3). Select switches from SwA
to SwH to combine the logic switch. The logic relationship includes
"
And
"
,
Or
and
"
Xor
"
. The combination is as follows
功能说明
：
当需要用一组开关来进行预设一些功能时，可使用此功能。
The
logic switch
is a virtual switch which consists of two switches plus a
mathematical logicl relationship. The logic switch is used to control turning
on or turning off of some functions
Function Details:
As shown in the picture 21.27: Select SwA up and SwB up and the
logic relationship
is set to or.
Sw1, Sw2
and
logic
switch
are displayed in real time. SwA is used to lower the wheels and logic Sw1 is to cut the engine. To accomplish this you need to
access the auxilary channels screen. So, if SwA and SwB pushed down at the same time, the engines will be cut
21.20.
飞机结构
Airplane structure
功能说明
：
此功能可根据飞机的结构自行设定的模型结构.
当设置模型类型为固定翼/滑翔机时,有引擎、油针、副翼、两个副翼、襟翼两个襟翼、扰流板、两个扰流板、升降、两个升降、
方向、两个方向、
V
型尾翼客供选择，当选择
10
以上飞机部件时，将提示“超过最大通道数”：（如图）因为
2
个方向和
V
型尾翼不
可能同时存在，所以选择两个方向时，
V
型尾翼自动隐藏。默认固定翼/滑翔机类型飞机部件为引擎、副翼、升降、方向的交联机。
Function Details:
This function can be set according to the airplane structure.
There are engine, throttle needle, aileron, two aileron, flap, two flap, sopliler, two sopliler, rudder, two rudder, V-tail to choose
if the mode type is fix wing or glider. There will be a reminder Maximum number of channels reached. if the airplane parts selected
is more than 10. Because the two rudders and V-tail can not exist at the same time, the V-tail will be hidden automatically when two
rudders is selected. The default type is Fix wing/glider with engine, aileron, elevator and rudder.
33
Digital proportional radio control system
