关于
TGY-i10
此功能用于机器的版本查询。
点击“
About TGY-i10”
，
如右图所示，显示当前版本号及日期；点击键返回。
固件更新：
发射机的内部软件可以通过
USB
接口连接电脑进行升级。
一旦这个功能被激活，发射机所有的功能将停止。进入这种模式前请关闭接收机，避免模型失控。
点触确认按钮即可实现硬件升级。
当硬件升级时，不要断开
USB
线或拔下电池，否则发射机将不能使用。
恢复出厂设置：
恢复发射机所有的数据到默
认值。即所有模型的数值和其他
设置将丢失，并恢复到默认状态。
点触确认按钮即可恢复出厂
设置。
语言：
用户界面可用多种语言显示。
(
Pic 21.72)
(
Pic 21.73)
(
Pic 21.74
(
Pic 21.75)
Language:
The user interface can be
displayed in several languages.
Firmware update:
The internal software of the transmitter can be updated using the USB interface
connected to a PC computer. Once this function is activated, all functions of the transmitter stop.
To avoid any loss of control of the vehicle, turn its receiver off before entering this mode.
A confirmation is requested.
When the firmware is updating, never disconnect the USB cable or remove the battery or
the transmitter will become unusable.
Factory reset :
Reset the whole configuration
of the transmitter to its default.
All model configurations and
other settings are lost and reset
to their default.
A confirmation is requested.
About TGY-i10
Touch 'About TGY-i10',
and the version of the
current firmware is as shown on the
left .
Touch the "OK" button to go back.
操作方法:
选择您要的语言,按返回键完成.
此功能需配合电脑完成,方式如下,
1
. 下载最新官方软件.
2
. 将遥控器与电脑通过
USB
线连接，
3
. 进入遥控器固件更新界面并按"确定”
双击电脑已下载的软件图标，再点击"
update”
按钮，
4
秒左右后完成更新。
Setup
Select the language you want and
press return button to complete.
This function can be helpful only when connected with computer. Follow the steps as shown below:
1. Download the newest official software
2. Connect a transmitter with a computer by USB cable
3. Enter transmitter firmware upgrade menu and press OK to complete
44
Http://www.turnigy.com
