舵机频率选择
调整接收机的输出频率，从
50~380Hz。滑动转轮调节频率
的数据，退出时设置成功。
Servo frequency selection:
Adjust the servo frequency
from 50HZ to 380HZ. Move the
wheel to modify the frequency
value, which can be saved on
exit.
i
-
BUS
设置：
如果舵机连接到外部
i
-
BUS
接
口则此功能有效，该功能能为每
个舵机分配一个通道。
(
Pic 21.61)
(
Pic 21.62)
i
-bus setup:
If servos are connected on
the external serial interface, this
function attributes a channel to
each servo.
Choose the channel
to
attribute.
21.24.
系统
System
此功能主要对系统的
一些基本参数进行设定。
背光：
调整背光的亮度。在阳光明
媚的天气可以使用高亮度的背光。
默认为
50%
。
背光越亮，发射机电池持
续的时间越短。
声音
：
开启或关闭发射机声音，默
认为开启。
自动关机:
开启此功能后，若当五分钟
内没有操作发射机时，发射机将
自动报警，报警时间会持续五分
钟，然后机器将自动关闭。报警
的同时
LED
会闪烁指示，点击
“自动关机”可取消自动关机功
能。
背光延时：
设置在无任何操作的情况下
屏幕背光的持续时默认为
30
秒。
屏幕背光持续的时间越长，
发射机电池的使用时间越短。
(
Pic 21.63)
(
Pic 21.64)
(
Pic 21.65)
(
Pic 21.66)
Backlight timeout:
30s is the default time of
backlight timeout when there is
no operation.
The longer the LCD
backlight stays on, the shorter
the battery of the transmitter
lasts.
Backlight:
This function is used to adjust
the brightness of the back light.
High brightness can be used on a
sunny day! 50% is the default
shown in picture 21.65!
The higher the brightness
is
,
the shorter the battery of the
transmitter lasts.
Sound:
Turn on or turn off the sound.
It defaults turn on the sound.
Auto power off:
After five minutes of no
operation, the transmitter will
sound an alarm and flash its
LED. After five more minutes of no operation, the
transmitter with automatically shut down. Touch "Auto
power off" to cancel automatic power off function.
This function is used to set some
parameters of the system
42
Http://www.turnigy.com
